12/30/2023 0 Comments Skychart 4.1 downloadSync by clicking on the Doom with the RED dot which in on the upper Tool Bar. You may do this by using Carte du Ciel or the Sitech program itself. But it is easier to use the 4.1 method.Ĥ.4 When the telescope has stopped slewing, check to see if the object is in the eyepiece, if not, use the hand pad to center the object in the telescope, looking through the finder scope or using the Telrad may assist you to center the object.Ĥ.5 After the object is in the center of the eyepiece sync CDC and Sitech. On the tool bar under Telescope, slew is also listed. But it is easier to use the 4.1 method.Ĥ.3. One can also right click the mouse, this will open up a box menu, go to Telescope then a second box opens where you can click on slew to the object selected. By clicking on that star.Ĥ.1 On the tool bar is button that looks like a dome with a spark symbol at the side, click on that to move the telescope.Ĥ.2. Also the Hand Pad moves the Ritchie in order to find an object should the software get lost, or you want to go see things on the moon…Ĥ.0 To begin an observing session, click on a bright star, usually the first one to have the courage to show itself, slew the telescope to that star. Throughout the course of an observing session all three will likely be used.ģ.2 The Hand Pad is used to center an object in the eyepiece and then to synchronize Sitech with CDC. The Hand Pad, through Carte du Ciel (CDC), or using the Sitech controller on the computer screen. We don’t want that to happen.ģ.1 The telescope can be moved in several ways Dan Gray’s humor is showing through this, he won’t fix it.2.4 The telescope should start and track automatically, if it doesn’t click on start.Ģ.6 On the upper Toolbar click on Telescope, a menu will open, click on connect telescope.Ģ.7 A large box will open, near the bottom there is the button that says connect, click on connect, the small box will turn from red to green.Ģ.8 Cart du Ceil is now connected to Sitech.ģ.0 Always know where the Telescope is going to move to, because the ladder, people, computer, just stuff can be in the way to get hit. Click on File to open a calibration file and open it.Ģ.3 Click on unpark, a window will pop up stating the telescope in not officially parked do you want to unpark it anyway? Click on yes. 2.1 Activate SitechĢ.2 Sitech will load up the pointing model, If Sitech does not automatically load a pointing model, click on the PXP button (the large box) to open up PXP to load a pointing model. Starting, Operation, and Closing Down the Ritchie Telescopeġ.0 Clear away obstructions from the movement of the telescope such as the ladder tools, chairs, etc which would hinder the free movement of the telescope.ġ.1 Place the computer stand in the NE area of the platform.ġ.2 If cables are needed to run the focuser and/or to a camera install them now.ġ.3 Remove the dust covers from over the mirror and the top of the telescope.ġ.4 Disconnect the 4 power cords under the platform.ġ.5 The hand pad and the dome/ring rotator is located in the top drawer of the cabinet.Ģ.0 Turn on the computer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |